Dynamic strain ageing and the mechanical response of alloys
J. Phys. III France, 1 6 (1991) 929-943
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Investigation of Tensile Flow Behavior of Al–Mg Alloy at Warm Temperature: Constitutive Modelling and Microstructural Evolution
Shahin Ahmad, Alankar Alankar, Vilas Tathavadkar and K. NarasimhanMetals and Materials International 30 (7) 1831 (2024)
https://doi.org/10.1007/s12540-023-01619-z
The effect of precipitate-free zone on mechanical properties in Al-Zn-Mg-Cu aluminum alloy: Strain-induced back stress strengthening
Mingyang Chen, Shengdan Liu, Kezhun He, Xu Zheng and Guilong JiaJournal of Alloys and Compounds 172426 (2023)
https://doi.org/10.1016/j.jallcom.2023.172426
On the Combined Role of Strain Hardening and Strain Rate on the Degree of Heterogeneity of Plastic Flow in an Al-2.5%Mg Alloy
Samir Dahdouh, Hakim Ait-Amokhtar and Abdelhamid SadeddineMechanics of Solids 57 (6) 1550 (2022)
https://doi.org/10.3103/S002565442206019X
Influence of C and N on Strain-Induced Martensite Formation in Fe-15Cr-7Mn-4Ni-0.5Si Austenitic Steel
Caroline Quitzke, Qiuliang Huang, Horst Biermann, Olena Volkova and Marco WendlerMaterials 14 (21) 6502 (2021)
https://doi.org/10.3390/ma14216502
Superalloys 2020
T. J. Jackson, J. Rolph, R. C. Buckingham and M. C. HardyThe Minerals, Metals & Materials Series, Superalloys 2020 535 (2020)
https://doi.org/10.1007/978-3-030-51834-9_52
Microstructure and Mechanical Properties of Gas Tungsten Arc Welded High Manganese Steel Sheet
Geon-Woo Park, Haeju Jo, Minha Park, et al.Metals 9 (11) 1167 (2019)
https://doi.org/10.3390/met9111167
A flow stress model for steel in cold forging process range and the associated method for parameter identification
Caner Şimşir and Deniz DuranThe International Journal of Advanced Manufacturing Technology 94 (9-12) 3795 (2018)
https://doi.org/10.1007/s00170-017-1160-x
Tensile Properties and Deformation Behaviors of a New Aluminum Alloy for High Pressure Die Casting
Peng Zhang, Zhenming Li, Baoliang Liu and Wenjiang DingJournal of Materials Science & Technology 33 (4) 367 (2017)
https://doi.org/10.1016/j.jmst.2016.02.013
Strain rate jump induced negative strain rate sensitivity (NSRS) in aluminum alloy 2024: Experiments and constitutive modeling
Satyapriya Gupta, Armand Joseph Beaudoin and Juliette ChevyMaterials Science and Engineering: A (2016)
https://doi.org/10.1016/j.msea.2016.12.010
Improved tensile properties of a new aluminum alloy for high pressure die casting
Peng Zhang, Zhenming Li, Baoliang Liu, Wenjiang Ding and Liming PengMaterials Science and Engineering: A (2015)
https://doi.org/10.1016/j.msea.2015.10.127
Effect of alloy composition and heat treatment on mechanical performance of 6xxx aluminum alloys
Hao ZHONG, Paul ROMETSCH and Yuri ESTRINTransactions of Nonferrous Metals Society of China 24 (7) 2174 (2014)
https://doi.org/10.1016/S1003-6326(14)63329-X
The tensile response of Mo, Mo–Re and Mo–Si solid solutions
X.J. Yu and K.S. KumarInternational Journal of Refractory Metals and Hard Materials 41 329 (2013)
https://doi.org/10.1016/j.ijrmhm.2013.05.005
Influence of local mechanical loading paths on the oxidation assisted crack initiation of alloy 718
Benoît Ter-Ovanessian, Dominique Poquillon, Jean-Marc Cloué and Eric AndrieuMaterials Science and Engineering: A 533 43 (2012)
https://doi.org/10.1016/j.msea.2011.11.030
Identification of a strain-aging model accounting for Lüders behavior in a C-Mn steel
A. Marais, M. Mazière, S. Forest, A. Parrot and P. Le DelliouPhilosophical Magazine 92 (28-30) 3589 (2012)
https://doi.org/10.1080/14786435.2012.699687
Unstable plastic flow in the Al–2%Mg alloy, effect of annealing process
L. Ziani, S. Boudrahem, H. Ait-Amokhtar, M. Mehenni and B. KedjarMaterials Science and Engineering: A 536 239 (2012)
https://doi.org/10.1016/j.msea.2012.01.004
Effect of strain rate on tensile and compression behaviour of Al–Si/graphite composite
G. Rajaram, S. Kumaran and Satyam SuwasMaterials Science and Engineering: A 528 (19-20) 6271 (2011)
https://doi.org/10.1016/j.msea.2011.04.077
Temperature and surface potential correlations with serrated flow of low carbon steel
A. YilmazJournal of Materials Science 46 (11) 3766 (2011)
https://doi.org/10.1007/s10853-011-5290-5
Effects of dynamic strain aging on mechanical properties of SA508 class 3 reactor pressure vessel steel
S. Xu, X. Q. Wu, E. H. Han and W. KeJournal of Materials Science 44 (11) 2882 (2009)
https://doi.org/10.1007/s10853-009-3381-3
Experimental study by pyrometry of Portevin–Le Châtelier plastic instabilities—Type A to type B transition
N. Ranc and D. WagnerMaterials Science and Engineering: A 474 (1-2) 188 (2008)
https://doi.org/10.1016/j.msea.2007.04.012
Effect of temperature on flow and work hardening behavior of high bainite dual phase (HBDP) steels
Mohammad Reza Akbarpour and A. EkramiMaterials Science and Engineering: A 475 (1-2) 293 (2008)
https://doi.org/10.1016/j.msea.2007.04.099
Synergistic effects of interstitial impurities and radiation defects on mechanical characteristics of ferritic steels
I. Charit, C.S. Seok and K.L. MurtyJournal of Nuclear Materials 361 (2-3) 262 (2007)
https://doi.org/10.1016/j.jnucmat.2006.12.003
Localized Deformation due to Portevin–LeChatelier Effect in 18Mn–0.6C TWIP Austenitic Steel
Lei Chen, Han-Soo Kim, Sung-Kyu Kim and B. C. De CoomanISIJ International 47 (12) 1804 (2007)
https://doi.org/10.2355/isijinternational.47.1804
Heterogeneity in Plastic Deformation
J.C. Mach, Ji Dong Kang, A.J. Beaudoin and David S. WilkinsonMaterials Science Forum 519-521 85 (2006)
https://doi.org/10.4028/www.scientific.net/MSF.519-521.85
Fracture of Nano and Engineering Materials and Structures
J. Belotteau, C. Berdin, S. Forest, A. Parrot and C. PrioulFracture of Nano and Engineering Materials and Structures 827 (2006)
https://doi.org/10.1007/1-4020-4972-2_409
Creep and tensile behaviors of Fe–Cr–Al foils and laser microwelds at high temperature
Haitham El Kadiri, Yves Bienvenu, Kiran Solanki, Mark F. Horstemeyer and Paul T. WangMaterials Science and Engineering: A 421 (1-2) 168 (2006)
https://doi.org/10.1016/j.msea.2005.11.048
Some aspects of Portevin–Le Chatelier plastic instabilities investigated by infrared pyrometry
N. Ranc and D. WagnerMaterials Science and Engineering: A 394 (1-2) 87 (2005)
https://doi.org/10.1016/j.msea.2004.11.042
Finite element simulations of dynamic strain ageing effects at V-notches and crack tips
S. Graff, S. Forest, J.-L. Strudel, et al.Scripta Materialia 52 (11) 1181 (2005)
https://doi.org/10.1016/j.scriptamat.2005.02.007
Evolution of microstructures during dynamic recrystallization and dynamic recovery in hot deformed Nimonic 80a
Baohui Tian, Christoph Lind, Erhard Schafler and Oskar ParisMaterials Science and Engineering: A 367 (1-2) 198 (2004)
https://doi.org/10.1016/j.msea.2003.10.226
Serrated flow and tensile properties of a Mg–Y–Nd alloy
S.M. Zhu and J.F. NieScripta Materialia 50 (1) 51 (2004)
https://doi.org/10.1016/j.scriptamat.2003.09.039
Strain localization phenomena associated with static and dynamic strain ageing in notched specimens: experiments and finite element simulations
S. Graff, S. Forest, J.-L. Strudel, et al.Materials Science and Engineering: A 387-389 181 (2004)
https://doi.org/10.1016/j.msea.2004.02.083
Comparing characteristics of serrations in Al–Li and Al–Mg alloys
Baohui TianMaterials Science and Engineering: A 360 (1-2) 330 (2003)
https://doi.org/10.1016/S0921-5093(03)00471-4
Influence of dynamic strain aging on the ductile tearing of C–Mn steels: modelling by a local approach method
D Wagner, J.C Moreno, C Prioul, J.M Frund and B HoussinJournal of Nuclear Materials 300 (2-3) 178 (2002)
https://doi.org/10.1016/S0022-3115(01)00746-2
Temperature-fatigue Interaction, International Conference on Temperature-Fatigue Interaction, Ninth International Spring Meeting
J. Mendez, S. Mailly and P. VillechaiseEuropean Structural Integrity Society, Temperature-fatigue Interaction, International Conference on Temperature-Fatigue Interaction, Ninth International Spring Meeting 29 95 (2002)
https://doi.org/10.1016/S1566-1369(02)80066-8
Oxidation of Organic Matter in the Transition Zone of the Zechstein Kupferschiefer from the Sangerhausen Basin, Germany
Yu-Zhuang Sun and Wilhelm PüttmannEnergy & Fuels 15 (4) 817 (2001)
https://doi.org/10.1021/ef0002187
Yield-stress anomalies and high-temperature mechanical properties of intermetallics and disordered alloys
Daniel CaillardMaterials Science and Engineering: A 319-321 74 (2001)
https://doi.org/10.1016/S0921-5093(00)02017-7
Hydrogen induced plasticity in stress corrosion cracking of engineering systems
D Delafosse and T MagninEngineering Fracture Mechanics 68 (6) 693 (2001)
https://doi.org/10.1016/S0013-7944(00)00121-1
Serrated flow of aluminium alloys influenced by precipitates
Erwin Pink, Subodh Kumar and Baohui TianMaterials Science and Engineering: A 280 (1) 17 (2000)
https://doi.org/10.1016/S0921-5093(99)00650-4
Strain-ageing effects in γ-TiAl-based alloys
D.G Morris, M.M Dadras and M.A Morris-MuñozIntermetallics 7 (5) 589 (1999)
https://doi.org/10.1016/S0966-9795(98)00066-1
Dynamic strain aging sensitivity of heat affected zones in C–Mn steels
D Wagner, J.C Moreno and C PrioulJournal of Nuclear Materials 252 (3) 257 (1998)
https://doi.org/10.1016/S0022-3115(97)00279-1
Mechanical properties of Fe70Al30 single crystals investigated by in situ straining experiments in a TEM
G. Molénat, H. Rösner and D. CaillardMaterials Science and Engineering: A 258 (1-2) 196 (1998)
https://doi.org/10.1016/S0921-5093(98)00934-4
Superlocalization of plastic deformation in crystals at high temperatures
B.I. SmirnovMaterials Science and Engineering: A 233 (1-2) 56 (1997)
https://doi.org/10.1016/S0921-5093(97)00049-X
Peierls friction stresses and dynamic strain ageing in TiAl and Fe-30at.% Al alloys
G. Molénat, A. Couret and D. CaillardMaterials Science and Engineering: A 234-236 660 (1997)
https://doi.org/10.1016/S0921-5093(97)00280-3
Observations of dynamic strain aging in polycrystalline NiAl
M.L. Weaver, R.D. Noebe and M.J. KaufmanIntermetallics 4 (8) 593 (1996)
https://doi.org/10.1016/0966-9795(96)00045-3
Portevin—Le Châtelier instabilities and stoichiometric effects in B2 titanium aluminides
F. Popille, L.P. Kubin, J. Douin and S. NakaScripta Materialia 34 (6) 977 (1996)
https://doi.org/10.1016/1359-6462(95)00609-5
Computer-assisted evaluation of stress and time parameters of serrated flow in mild steel
S. Kumar, H. Weinhandl and E. PinkMaterials Science and Engineering: A 212 (2) 213 (1996)
https://doi.org/10.1016/0921-5093(96)10200-8
The influence of C and Si on the flow behavior of NiAl single crystals
M.L. Weaver, R.D. Noebe and M.J. KaufmanScripta Materialia 34 (6) 941 (1996)
https://doi.org/10.1016/1359-6462(95)00590-0
Manifestations of dynamic strain aging in soft-oriented NiAl single crystals
M. L. Weaver, M. J. Kaufman and R. D. NoebeMetallurgical and Materials Transactions A 27 (11) 3542 (1996)
https://doi.org/10.1007/BF02595446
On a method to determine directly the waiting time of arrested dislocations and the elementary strain in dynamic strain ageing
F. Springer and Ch. SchwinkScripta Metallurgica et Materialia 32 (11) 1771 (1995)
https://doi.org/10.1016/0956-716X(95)00003-E
IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics
D. Delafosse and L. P. KubinSolid Mechanics and Its Applications, IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics 39 275 (1995)
https://doi.org/10.1007/978-94-015-8494-4_37
Serrated flow in aluminium base alloys
J. M. RobinsonInternational Materials Reviews 39 (6) 217 (1994)
https://doi.org/10.1179/imr.1994.39.6.217
Dislocation Dynamics and Yield Stress Anomalies in Intermetallic Alloys
Daniel CaillardMRS Proceedings 364 (1994)
https://doi.org/10.1557/PROC-364-17
The Effects of Interstitial Content and Annealing on the Flow and Fracture behavior of Polycrystalline ÿ-NiAl
M. L. Weaver, V. Levit, M. J. Kaufman and R. D. NoebeMRS Proceedings 364 425 (1994)
https://doi.org/10.1557/PROC-364-425